TEMPLATE BASED DEFECT DETECTION OF FLEXIBLE PRINTED CIRCUIT
DOI:
https://doi.org/10.11113/jt.v78.1153Keywords:
Visual inspection, flexible printed circuit (FPC), image elimination-subtraction, image acquisition, defect classificationAbstract
This study presented a research on machine vision inspection to define defects on flexible printed circuit (FPC). The images were subjected to image processing system where an elimination-subtraction method used. In this algorithm, 7 types of FPC defects defined and simulated in the system using Specimen 1 and processing time taken for both side inspection was 3.3s. Then, the commercial patent design of FPC was tested as specimen 2 to define short circuit defects on it. The processing time taken by this algorithm on specimen 2 was 0.28s. Comparison on manual inspection and machine vision implementation were carried out and greatly resulted on shorten inspection time to 59.7%. This result shows significant contribution in increasing the efficiency of FPC inspection process.Â
References
Bozkurt, A. and A. Lal. 2011. Low-cost Flexible Printed Circuit Technology Based Microelectrode Array for Extracellular Stimulation of the Invertebrate Locomotory System. Sensors and Actuators A: Physical. 169(1): 89-97.
Kima, S. H., H. Y. Cha, C. M. Miesse, J. H. Jang, Y. S. Oh and S. W. Cha. 2009. Air-Breathing Miniature Planar Stack Using the Flexible Printed Circuit Board as a Current Collector. International Journal of Hydrogen Energy. 34(1): 459-466.
Moganti, M., F. Ercal, C. H. Dagli and S. Tsunekawa. 1996. Automatic PCB Inspection Algorithms: A Survey. Computer Vision and Image Understanding. 63(2): 287-313.
Wu, W. Y., M. J. J. Wang and C. M. Liu. 1996. Automated Inspection of Printed Circuit Boards Through Machine Vision. Computers in Industry. 28(2): 103-111.
Leong, W. C., M. Z. Abdullah and C. Y. Khor. 2012. Application of Flexible Printed Circuit Board (FPCB) in Personal Computer Motherboards: Focusing on Mechanical Performance. Microelectronics Reliability. 52(4): 744-756.
Drury, C. G. 2000. Human Factors in Aircraft Inspection. Proceedings of the Aging Aircraft Fleets. Structural and Other Subsystem Aspects, November 13-16. Sofia, Bulgaria. 7: 1-7:11.
Yannick, C. 2010. Inspection of Complex Surfaces by Meansof Structured Light Patterns. OPTICS EXPRESS. 18(7): 6642-6660.
Shirvaikar, M. 2006. Trends in Automated Visual Inspection. J. Real-Time Image Process. 1: 41-43.
Charette, C., S. Park, R. Williams, B. Benhabib and K.C. Smith. 1988. Development and Integration of a Micro-Computer Based Image Analysis System for Automatic PCB Inspection. Proceedings of the IEEE International Conference on Computer Integrated Manufacturing, May 23-25. Troy, NY., USA.129-135.
Forsyth, D. A. and J. Ponce. 2003. Computer Vision a Modern Approach. Prentice Hall: USA.
Chauhan, A. P. S. and S. C. Bhardwaj. 2011. Detection of Bare PCB Defects by Image Subtraction Method Using Machine Vision. Proceedings of the World Congress on Engineering, Volume 2, July 6-8, London, UK. 1597-1601.
Ibrahim, Z., S. A. R. Al-Attas and Z. Aspar. 2002. Model-Based PCB Inspection Technique using Wavelet Transform. Proceedings of the 4th Asian Control Conference, September 25-27, Singapore. 2026-2029.
Farooq, U., T. King, P.H. Gaskell and N. Kapur. 2004. Machine Vision Using Image Data Feedback for Fault Detection in Complex Deformable Webs. Transactions of the Institute of Measurement and Control. 26(2): 119-137.
Downloads
Published
Issue
Section
License
Copyright of articles that appear in Jurnal Teknologi belongs exclusively to Penerbit Universiti Teknologi Malaysia (Penerbit UTM Press). This copyright covers the rights to reproduce the article, including reprints, electronic reproductions, or any other reproductions of similar nature.
