ERT Visualization of Gas Dispersion Performance of Aerofoil and Radial Impellers in an Agitated Vessel

Authors

  • Mohd Sobri Takriff Department of Chemical and Process Engineering, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor Malaysia
  • Azmi Ahmad Department of Chemical and Process Engineering, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor Malaysia
  • Masli Irwan Rosli Department of Chemical and Process Engineering, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor Malaysia
  • Sadiah Jantan Electrical and Electronic Section, MFI-UNIKL, Section 14, Jalan Teras Jernang, 43650 Bandar Baru Bangi, Selangor

DOI:

https://doi.org/10.11113/jt.v64.2136

Keywords:

Electrical resistance tomography, gas dispersion, gas–liquid mixing, impeller flooding

Abstract

The objective of this research work was to determine the gas dispersion performance of an aerofoil impeller and a standard Rushton turbine for gas–liquid mixing an agitated vessel via electrical resistance tomography (ERT) visualization. The experimental work was carried out in a fully baffled 400-mm-diameter agitated vessel that was fitted with four planes of 16 stainless steel electrodes connected to an ITS P2000 ERT system. Agitation was achieved by using a Lightnin Labmaster system mounted on the vessel. The ITS ERT system is equipped with a real-time data acquisition system that has the capability to capture images at up to 20 frames per second. The gas dispersion images were reconstructed using built-in image reconstruction software based on a modified linear back projection algorithm. A Matlab code was also developed to further analyse the gas dispersion by plotting a real-time surface plot from the ERT data. Various gas dispersion conditions such as flooded, transition, and dispersed were successfully visualized and characterized using the ERT technique, and over the range of the experimental works, the standard Rushton turbine was found to be a more efficient than the Lightnin A320 impeller.

References

Oldshue, J. Y. 1983. Fluid Mixing Technology. New York: McGraw-Hill.

Paui, E. L., Atieomo-Obeng, V. A. & Kresta, S. M. 2004. Handbook of Industrial Mixing Science and Practice. Wiley.

Tatterson, G. B. 1991. Fluid Mixing and Gas Dispersion in Agitated Tanks. New York: McGraw-Hill.

Vesselinov, H. H., Stephan, B., Uwe, H., Holger, K., Günther, H & Wilfried, S. 2008. A Study on the Two-phase Flow in a Stirred Tank Reactor Agitated by a Gas-Inducing Turbine. Chemical Engineering Research and Design. 86: 75–81.

Córdova-Aguilar, M. S., Díaz-Uribe, R., Escobar, O., Corkidi, G. & Galindo, G. 2008. An Optical Approach for Identifying the Nature and the Relative 3D Spatial Position of Components of Complex Structures Formed in Multiphase Dispersion Systems. Chemical Engineering Science. 63: 3047–3056.

Dyakowski, T. 2005. Application of electrical capacitance tomography for imaging of industrial processes. Journal of Zheijing University Science. 6A(12): 1374–1378.

Mann, R. 2005. Electrical Process Tomography: Seeing Without Eyes Inside Stirred Vessels. Journal of Zhejiang University Science. 6(A): 1379–1385.

Wang, M., Dorward, A., Vlaev, D. & Mann, R. 2000. Measurements of Gas–Liquid Mixing in a Stirred Vessel Using Electrical Resistance Tomography (ERT). Chemical Engineering Journal. 77: 93–98.

Fransolet, E., Crine, M., Marchot, P. & Toye, D. 2005. Analysis of Gas Holdup in a Bubble Column with a Non-Newtonian Fluid Using Electrical Resistance Tomography and Gas Dynamics Disengagement Techniques. Chemical Engineering Science. 60: 6118–6123.

Jin, H. Wang, M. & Williams, R. A. 2007. Analysis of Bubble Behaviors in Bubble Columns Using Electrical Resistance Tomography. Chemical Engineering Journal. 130: 179–185.

Wang, M. 2005. Impedance Mapping of Particulate Multiphase Flow. Flow Measurement Instruments. 18: 183–189.

Dong, F., Jiang, F. Z., Qiao, X. T. & Xu, L. A. 2003. Application of Electrical Resistance Tomography To Two-Phase Pipe Flow Parameter Measurements. Flow Measurement Instruments. 14: 183–192.

Takriff, M. S., Ahmad A. & Kamaruddin, S. K. 2010. ERT Imaging of Gas–Liquid Mixing in Agitated Vessel. Journal of Chemistry and Chemical Engineering. 4(29): 24–28

Takriff, M. S, Hamzah, A. A., Kamaruddin, S. K. & Abdullah, J. 2009. Electrical Resistance Tomography Investigation of Gas Dispersion in Gas–Liquid Mixing In An Agitated Vessel. Journal of Applied Sciences. 9(17): 3110–3115.

Slater, L., Binley, A., Versteeg, R., Cassiani, G., Birken, R. & Sandberg, S. 2002. A 3D ERT Study Of Solute Transport In A Large Experimental Tank. Journal of Applied Geophysics. 49 (4): 211–229.

Holden, P. J., Wang, M., Mann, R., Dickin, F. J. & Edwards, R. B. 1999. On Detecting Pathologies Inside a Stirred Vessel Using Electrical Resistance Tomography. Transactions of IChemE. 77(Part A): 709–712.

Downloads

Published

2013-09-15

Issue

Section

Science and Engineering

How to Cite

ERT Visualization of Gas Dispersion Performance of Aerofoil and Radial Impellers in an Agitated Vessel. (2013). Jurnal Teknologi (Sciences & Engineering), 64(5). https://doi.org/10.11113/jt.v64.2136