Early Detection of Pipeline Leakage Using Ultrasonic Sensor

Authors

  • Herlina Abdul Rahim Protom-i Research Group, Infocomm Research Alliance, Control and Mechatronic Engineering Department, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia
  • Khairulanam Abd Hamid Protom-i Research Group, Infocomm Research Alliance, Control and Mechatronic Engineering Department, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia
  • Hafilah Zainal Abidin Language Academy, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia

DOI:

https://doi.org/10.11113/jt.v73.4239

Keywords:

Component, leakage pipeline, ultrasonic sensor

Abstract

Pipelines leakage is the main problem faced by industries. The main causes of leakage on pipelines are corrosion, crack and disaster. This problem must be detected early to ensure that maintenance work can be done quickly to prevent pipe bursts, as well as to minimize operational costs. The objective of this research is to review a method for early detection of leakage on pipeline that affect by the changing water level in the pipeline. The method used in this research is ultrasonic sensor that is implanted on the outer surface pipeline.

References

Mohd Hafiz, F. R., Ruzairi. A. R. and Nor Muzakkir, N. A. 2011. The Front-End Hardware Design Issue in Ultrasonic Tomography. IEEE Sensor Journal. 10(7): 1276–1281.

Mohd Hafiz, F. R. June 2005. Non-Invasive Imaging of Liquid/Gas Flow Using Ultrasonic Transmission-Mode Tomography. Universiti Teknologi Malaysia.

Downloads

Published

2015-03-18

How to Cite

Early Detection of Pipeline Leakage Using Ultrasonic Sensor. (2015). Jurnal Teknologi (Sciences & Engineering), 73(3). https://doi.org/10.11113/jt.v73.4239