A Review on The Exploration of Nanomaterials Application in Pavement Engineering
DOI:
https://doi.org/10.11113/jt.v73.4291Keywords:
Nanotechnology, nanoparticles, modified asphalt binder, pavement engineeringAbstract
In order to improve the performance of asphalt mixture, the virgin asphalt binder needs to be modified with suitable modifiers. There are various types of modifiers available in market and it is clearly stated and established in most of pavement standard specification. Nowadays, pavement technologist and researchers had put their interests on nanotechnology and they had found that polymeric nanocomposites have shown its effectiveness through the modification of virgin asphalt binder with certain portion of nanomaterials. In addition, many studies have demonstrated that nanomaterials have significant effects in improving the engineering properties of asphalt binder and mixture. Therefore, a thorough literature review on the current research of nanomaterials in pavement engineering for the past decades can enhance understanding and guaranteed something beneficial findings in the future. This paper described the theory of nanotechnology and its historical development including the method used among researchers in evaluation the structural and morphological characteristics of modified binder with nanoparticles. Also, the effect of different types of nanoparticles, suitable dosages, modifying procedures, problems and benefits on asphalt binder and mixture were explained. It is expected that in future the implementations of nanotechnology would have major impacts for better pavement performance.
References
Sahoo, S. K., Parveen, S. and Panda, J. J. 2007. The present and future of nanotechnology in human health care. Nanomedicine: Nanotechnology, Biology and Medicine. 3(1): 20–31.
Zhu, W., Bartos, P. and Porro, A. 2004. Application of nanotechnology in construction. Materials and Structures. 37(9): 649–658.
Tegart, G. 2009. Energy and nanotechnologies: Priority areas for Australia's future. Technological Forecasting and Social Change. 76(9): 1240–1246.
Salerno, M., Landoni, P. and Verganti, R. 2008. Designing foresight studies for Nanoscience and Nanotechnology (NST) future developments. Technological Forecasting and Social Change. 75(8): 1202–1223.
Sobolev, K., Flores, I., Hermosillo, R. and Torres-MartÃnez, L.M. 2006. Nanomaterials and Nanotechnology for High-Performance Cement Composites ACI Session on Nanotechnology of Concrete: Recent Developments and Future Perspectives. November 7. 91–118.
Mamalis, A. G. 2007. Recent advances in nanotechnology. Journal of Materials Processing Technology. 181(1-3): 52–58.
Glenn, J. C. 2006. Nanotechnology: Future military environmental health considerations. Technological Forecasting and Social Change. 73(2): 128–137.
Roduner, E. 2006. Nanoscopic Materials Size-Dependent Phenomena. 1st ed. Stuttgart, Germany. RSC Publishing.
You, Z., Mills-Beale, J., Foley, J.M., Roy, S., Odegard, G.M., Dai, Q. and Goh, S.W. 2011. Nanoclay-modified asphalt materials: Preparation and characterization. Construction and Building Materials. 25(2): 1072–1078.
Bystrzejewska-Piotrowska, G., Golimowski, J. and Urban, P.L. 2009. Nanoparticles: Their potential toxicity, waste and environmental management. Waste Management. 29(9): 2587–2595.
Miyazaki, K. and Islam, N. 2007. Nanotechnology systems of innovation - An analysis of industry and academia research activities. Technovation. 27(11): 661–675.
Sanchez, F. and Sobolev, K. 2010. Nanotechnology in concrete - A review. Construction and Building Materials. 24(11): 2060-2071.
Taniguchi, N.1974. On the basic concept of nanotechnology. Proceedings of the International Conference on Production Engineering. Tokyo. 18–23.
Drexler, K. E. 1981. Molecular engineering: An approach to the development of general capabilities for molecular manipulation. Proceedings of the National Academy of Sciences. 5275–78.
Cao, G. 2006. Nanostructures & Nanomaterials: Synthesis, Properties & Applications. 1st ed. London. Imperial College Press.
Islam, N. and Miyazaki, K. 2010. An empirical analysis of nanotechnology research domains. Technovation. 30(4): 229–237.
Pacheco-Torgal, F. and Jalali, S. 2011. Nanotechnology: Advantages and drawbacks in the field of construction and building materials. Construction and Building Materials. 25(2): 582–590.
Steyn, W. J. V. 2008. Research And Application of Nanotechnology in Transportation. 27th Southern African Transport Conference. 345–353.
Uskokovic, V. 2007. Nanotechnologies: What we do not know. Technology in Society. 29(1): 43–61.
Kostoff, R. N., Koytcheff, R.G. and Lau, C. G. Y. 2007. Global nanotechnology research literature overview. Technological Forecasting and Social Change. 74(9): 1733–1747.
Arkema. 2011. Analytical Techniques of Structural Characterization [Online]. Retrieved on October 2011, from http://www.arkema-inc.com/.
Lee, S. L., Windover, D., Doxbeck, M., Nielsen, M., Kumar, A. and Lu, T.M. 2000. Image plate X-ray diffraction and X-ray reflectivity characterization of protective coatings and thin films. Thin Solid Films. 377-378: 447–454.
Faurie, D., Renault, P. O., Le Bourhis, E. and Goudeau, P. 2006. Study of texture effect on elastic properties of Au thin films by X-ray diffraction and in situ tensile testing. Acta Materialia. 54(17): 4503–4513.
Zhong, Y., Ping, D., Song, X. and Yin, F. 2009. Determination of grain size by XRD profile analysis and TEM counting in nano-structured Cu. Journal of Alloys and Compounds. 476(1–2): 113-117.
Pattanaik, S., Huffman, G. P., Sahu, S. and Lee, R. J. 2004. X-ray absorption fine structure spectroscopy and X-ray diffraction study of cementitious materials derived from coal combustion by-products. Cement and Concrete Research. 34(7): 1243–1249.
Ortiz, A. L. and Shaw, L. 2004. X-ray diffraction analysis of a severely plastically deformed aluminum alloy. Acta Materialia. 52(8): 2185-2197.
Joy, D.C. Scanning electron microscopy for materials characterization. 1997. Current Opinion in Solid State and Materials Science. 2(4): 465–468.
Kalaitzidis, S. and Christanis, K. 2003. Scanning electron microscope studies of the Philippi peat (NE Greece): initial aspects. International Journal of Coal Geology. 54(1-2): 69–77.
Lim, S. C., Kim, K. S., Lee, I. B., Jeong, S. Y., Cho, S., Yoo, J. E. and Lee, Y.H. 2005. Nanomanipulator-assisted fabrication and characterization of carbon nanotubes inside scanning electron microscope. Micron. 36(5): 471–476.
Yao, H. and Kimura, K. 2007. Microscopy Book Series, in Field Emission Scanning Electron Microscopy for Structural Characterization of 3D Gold Nanoparticle Superlattices, A. Méndez-Vilas, J.D., Editor, Formatex Badajoz, Spain.
Bazzana, S., Dumrul, S., Warzywoda, J. and Sacco Jr, A. 2006. Low-voltage high-resolution scanning electron microscope imaging of the uncoated and Cr-coated zeolite Beta. Microporous and Mesoporous Materials. 92(1-3): 165–172.
De Souza, W., Campanati, L. and Attias, M. 2008. Strategies and results of field emission scanning electron microscopy (FE-SEM) in the study of parasitic protozoa. Micron. 39(2): 77–87.
Yarahmadi, N., Jakubowicz, I. and Hjertberg, T. 2010. Development of poly(vinyl chloride)/montmorillonite nanocomposites using chelating agents. Polymer Degradation and Stability. 95(2): 132–137.
Ghile, D. 2006. Effects of nanoclay modification on rheology of bitumen and on performance of asphalt mixtures Thesis M. Eng. Delft University of Technology.
Jahromi, S. G. and Khodaii, A. 2009. Effects of nanoclay on rheological properties of bitumen binder. Construction and Building Materials. 23(8): 2894–2904.
Yu, J.Y., Feng, P.C., Zhang, H.L. and Wu, S.P. 2009. Effect of organo-montmorillonite on aging properties of asphalt. Construction and Building Materials. 23(7): 2636–2640.
Galooyak, S. S., Dabir, B., Nazarbeygi, A. E. and Moeini, A. 2010. Rheological properties and storage stability of bitumen/SBS/montmorillonite composites. Construction and Building Materials. 24(3): 300–307.
Jahromi, S.G., Andalibizade, B. and Vossough, S. 2010. Engineering Properties of Nanoclay Modified Asphalt Concrete Mixtures. The Arabian Journal for Science and Engineering. 35(Number 1B): 89–103.
Yao, H., You, Z., Li, L., Goh, S. W., Lee, C.H., Yap, Y. K. and Shi, X. 2013. Rheological properties and chemical analysis of nanoclay and carbon microfiber modified asphalt with Fourier transform infrared spectroscopy. Construction and Building Materials. 38(0): 327–337.
Zare-Shahabadi, A., Shokuhfar, A. and Ebrahimi-Nejad, S. 2010. Preparation and rheological characterization of asphalt binders reinforced with layered silicate nanoparticles. Construction and Building Materials. 24(7): 1239–1244.
Zhang, B., Xi, M., Zhang, D., Zhang, H. and Zhang, B. 2009 The effect of styrene-butadiene-rubber/montmorillonite modification on the characteristics and properties of asphalt. Construction and Building Materials. 23(10): 3112–3117.
Yu, J., Zeng, X., Wu, S., Wang, L. and Liu, G. 2007. Preparation and properties of montmorillonite modified asphalts. Materials Science and Engineering: A. 447(1–2): 233–238.
Aragão, F.T.S., Lee, J., Kim, Y.R. and Karki, P. 2010. Material-specific effects of hydrated lime on the properties and performance behavior of asphalt mixtures and asphaltic pavements. Construction and Building Materials. 24(4): 538–544.
Cheng, J., Shen, J. and Xiao, F. 2011. Moisture Susceptibility of Warm Mix Asphalt Mixtures Containing Nanosized Hydrated Lime. Journal of Materials in Civil Engineering. 1(1): 265.
Gorkem, C. and Sengoz, B. 2009. Predicting stripping and moisture induced damage of asphalt concrete prepared with polymer modified bitumen and hydrated lime. Construction and Building Materials. 23(6): 2227–2236.
Lee, S., Seo, Y. and Kim, Y. 2010. Effect of hydrated lime on dynamic modulus of asphalt-aggregate mixtures in the state of North Carolina. KSCE. Journal of Civil Engineering. 14(6). 829–837.
Özen, H. 2011. Rutting evaluation of hydrated lime and SBS modified asphalt mixtures for laboratory and field compacted samples. Construction and Building Materials. 25(2): 756–765.
Amirkhanian, A.N., Xiao, F. and Amirkhanian, S.N. 2011. Characterization of Unaged Asphalt Binder Modified with Carbon Nano Particles International Journal of Pavement Research and Technology. 4(5): 281–286.
Li, W., Buschhorn, S. T., Schulte, K. and Bauhofer, W. 2011. The Imaging Mechanism, Imaging Depth, And Parameters Influencing The Visibility Of Carbon Nanotubes In A Polymer Matrix Using An SEM. Carbon. 49(6): 1955–1964.
Mamalis, A. G., Vogtländer, L. O. G. and Markopoulos, A. 2004. Nanotechnology and nanostructured materials: trends in carbon nanotubes. Precision Engineering. 28(1): 16–30.
Xiao, F., Amirkhanian, A. N. and Amirkhanian, S.N. 2011. Influence of Carbon Nanoparticles on the Rheological Characteristics of Short-Term Aged Asphalt Binders. Journal of Materials in Civil Engineering. 23(4): 423–431.
Hassan, M. M., Dylla, H., Mohammad, L. N. and Rupnow, T. 2010 Evaluation of the durability of titanium dioxide photocatalyst coating for concrete pavement. Construction and Building Materials. 24(8): 1456–1461.
Kim, T. K., Lee, M. N., Lee, S.H., Park, Y. C., Jung, C. K. and Boo, J.H. 2005. Development of surface coating technology of TiO2 powder and improvement of photocatalytic activity by surface modification. Thin Solid Films. 475(1–2): 171–177.
Chen, J. and Poon, C. S. 2009. Photocatalytic construction and building materials: From fundamentals to applications. Building and Environment. 44(9): 1899–1906.
Li, H., Zhang, M. H. and Ou, J. P. 2006. Abrasion resistance of concrete containing nano-particles for pavement. Wear. 260(11–12): 1262–1266.
Li, H., Zhang, M. H. and Ou, J. P. 2007. Flexural fatigue performance of concrete containing nano-particles for pavement. International Journal of Fatigue. 29(7): 1292–1301.
Zhang, M. H. and Li, H. 2011. Pore structure and chloride permeability of concrete containing nano-particles for pavement. Construction and Building Materials. 25(2): 608–616.
Fujishima, A., Zhang, X. and Tryk, D. A. 2008. TiO2 photocatalysis and related surface phenomena. Surface Science Reports. 63(12): 515–582.
Chen, M. and Liu, Y. 2010. NOx removal from vehicle emissions by functionality surface of asphalt road. Journal of Hazardous Materials. 174(1–3): 375–379.
Yusoff, N. I. M., Mounier, D., Marc-Stéphane, G., Hainin, M. R., Airey, G. D. and Di Benedetto, H. 2013. Modelling the rheological properties of bituminous binders using the 2s2p1d model. Construction and Building Materials. 38: 395–406.
Yusoff, N. I. M., Jakarni, F. M., Nguyen, V. H., Hainin, M. R. and Airey, G. D. 2013. Modelling the rheological properties of bituminous binders using mathematical equations. Construction and Building Materials. 40: 174–188.
Yusoff, N. I. M., Airey, G. D. and Hainin, M. R. 2010. Predictability of complex modulus using rheological models. Asian Journal of Scientific Research. 3(1): 18–30.
Cooley Jr, L. A., Prowell, B. D. and Hainin, M. R. 2003. Comparison of the Saturated Surface-Dry and Vacuum Sealing Methods for Determining the Bulk Specific Gravity of Compacted HMA (with discussion and closure). Journal of the Association of Asphalt Paving Technologists. 72.
Oluwasola, E. A., Hainin, M. R., Aziz, M. M. A., Yaacob, H. and Warid, M. N. M. 2014. Potentials of steel slag and copper mine tailings as construction materials. Materials Research Innovations. 18(S6): S6–250.
Ling, T. C., Nor, H. M. and Hainin, M. R. 2009. Properties of concrete paving blocks incorporating crumb rubber and SBR latex. Road Mater Pave Des. 10(1): 213–222.
Downloads
Published
Issue
Section
License
Copyright of articles that appear in Jurnal Teknologi belongs exclusively to Penerbit Universiti Teknologi Malaysia (Penerbit UTM Press). This copyright covers the rights to reproduce the article, including reprints, electronic reproductions, or any other reproductions of similar nature.
