EFFECT OF VISCOELASTIC BEHAVIOR OF CELLULOSE OIL PALM FIBER (COPF) MODIFIED 60-70 ASPHALT BINDER FOR DETERIORATION FOR ROADS AND HIGHWAYS

Authors

  • Md. Maniruzzaman A. Aziz Faculty of Civil Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia.
  • Ahmed Wsoo Hamad Faculty of Civil Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia.
  • Abdulmalik Musa Maleka Faculty of Civil Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia.
  • Fauzan Mohd Jakarni Faculty of Engineering, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor, Malaysia

DOI:

https://doi.org/10.11113/jt.v75.5294

Keywords:

Cellulose oil palm fiber, rheological properties, deterioration, viscoelastic, complex shear modulus (G*), short and long term aging.

Abstract

This paper dealt with the viscoelastic behavior of Cellulose Oil Palm Fiber (COPF) modified 60-70 penetration grade asphalt binder for the deterioration of roads. The main objective of this study was to investigate the effect of various COPF contents on the physical and the rheological properties of penetration grade 60-70 asphalt binder. Laboratory tests performed comprised of viscosity, penetration, softening point, short & long term ageing, as well as complex shear modulus (G*).  The COPF was blended in 0.2, 0.4, 0.6, 0.8, and 1.0% by weight of asphalt binder, including 0% as control. The COPF modified asphalt binder showed an increasing viscosity and softening point with the increase of COPF content, whereas the penetration decreased as the COPF was increased for the binder. The complex shear modulus (G*), rutting factor (G*/sin δ), and fatigue factor (G*sin δ) showed significant improvement for the modified samples compared to the unmodified samples. The results indicated that the COPF modified asphalt binder had high potential to resist permanent (rutting) deformation and fatigue cracking than the unmodified sample. 

References

Muniandy, R., E. Aburkaba, and L. Mahdi. 2012. Effects of mineral filler particle size and type on permanent deformation of stone mastic asphalt mixtures. GJ P&A Sc and Technol. 50-64.

Taher, B. M., R. K. Mohamed, and A. Mahrez. 2011. A review on fatigue and rutting performance of asphalt mixes. Scientific Research and Essays. 6(4): 670-682.

Jafariahangari, H. 2008. Performance of Cellulose Palm Fiber As An Additive In Asphalt Blends. Universiti Putra Malaysia.

Vargas, M. A., M. A. Vargas, A. Sánchez-Sólis, and O. Manero. 2013. Asphalt/polyethylene blends: Rheological properties, microstructure and viscosity modeling. Construction and Building Materials. 45: 243-250.

Muniandy, R. and B. B. Huat. 2006. Laboratory diameteral fatigue performance of stone matrix asphalt with cellulose oil palm fiber. American Journal of Applied Sciences. 3(9): 2005-2010.

Muniandy, R., H. Jafariahangari, R. Yunus, and S. Hassim. 2008. Determination of rheological properties of bio mastic asphalt. American Journal of Engineering and Applied Sciences. 1(3): 204.

Roberts, F. L., P. S. Kandhal, E. R. Brown, D.-Y. Lee, and T. W. Kennedy. 1996. Hot mix asphalt materials, mixture design and construction.

Wang, H., P. Hao, and Z. You. 2011. Characterization of the Viscoelastic Property of Asphalt Mastic. Pavements and Materials. 115-122.

Aziz, M. M. B., R. Muniandy, A. R. M. Khazani Abdullah, K. Khalid, and A. Ismail. 2006. Preliminary Determination of Asphalt Properties Using Microwave Techniques.

Chow, R. S., D. L. Tse, and K. Takamura, The conductivity and dielectric behavior of solutions of bitumen in toluene. The Canadian Journal of Chemical Engineering, 2004. 82(4):. 840-845.

Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer, in ASTM D4402 / D4402M 2013. American Society for Testing and Material: Philadelphia, USA.

Standard Test Method for Penetration of Bituminous Materials, in ASTM D5 / D5M - 13. 2013. American Society for Testing and Material: Philadelphia, USA.

Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus), in ASTM D36 / D36M - 12 2012, American Society for Testing and Material: Philadelphia, USA.

Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test), in ASTM D2872 - 12e1 2012. American Society for Testing and Material: Philadelphia, USA.

Test Method of Standard Practice for Accelerated Ageing of Asphalt Binder Using a Pressurized Ageing Vessel (PAV), in ASTM D6521-13. 2013. American Society for Testing and Material: Philadelphia, USA.

Standard method of test for determining the rheological properties of asphalt binder using a Dynamic Shear Rheometer (DSR), in AASHTO T315-09. 2009. American Association of State Highway and Transportation Officials: USA.

Downloads

Published

2015-08-27

How to Cite

EFFECT OF VISCOELASTIC BEHAVIOR OF CELLULOSE OIL PALM FIBER (COPF) MODIFIED 60-70 ASPHALT BINDER FOR DETERIORATION FOR ROADS AND HIGHWAYS. (2015). Jurnal Teknologi, 75(11). https://doi.org/10.11113/jt.v75.5294