INVESTIGATION ON HEAT TRANSFER ENHANCEMENT IN A CORRUGATED FIN-AND-TUBE COMPACT HEAT EXCHANGER
DOI:
https://doi.org/10.11113/jt.v78.9662Keywords:
Fin-and-tube compact heat exchanger, Corrugated fin, Heat transfer enhancement, Performance evaluation, Numerical simulationAbstract
Heat transfer augmentation and pressure loss penalty in the fin-and-tube compact heat exchangers (FTCHEs) with the corrugated shape as a special form of the fin are numerically investigated to improve heat transfer performance criteria in low Reynolds numbers. The corrugated fin as the newly design of fin pattern is presented in this study. The influence of applying corrugated design adjustments on the thermal and hydraulic characteristics of air flow are analyzed on the in-line tube arrangements. The performance of air-side heat transfer and fluid flow is investigated by numerical simulation for Reynolds number ranging from Re = 400 to 800 based on the tube collar diameter, with the corresponding frontal air velocity ranging from 0.35 to 0.72 m/s. The outcomes of simulation revealed that the corrugated fin could significantly improve the heat transfer augmentation of the FTCHEs with a moderate pressure loss penalty. The computational results indicated that some eddies were developed behind the fluted domain of corrugated finwhich produce some disruptions to fluid flow and enhance heat transfer compared with plain fin. The corrugated form of fins could enhance the thermal mixing of the fluid, delay the boundary layer separation, and reduce the size of the wake and the recirculation region behind tubes compared with the conventional form of the fin at the range of Reynolds number used in this study. In addition, the results showed that the average Nusselt number for the FTCHE with corrugated fin increased by 7.05–10.0% over the baseline case and the corresponding pressure loss decreased by 5.0–6.2%.
References
He, Y.-L., P. Chu, W.-Q. Tao, Y.-W. Zhang, T. Xie. 2012. Analysis of Heat Transfer and Pressure Drop for Fin-and-Tube Heat Exchangers with Rectangular Winglet-Type Vortex Generators. Applied Thermal Engineering. 61: 770-783.
Wahid, M. A., A. A. Gholami, H. a. Mohammed. 2013. Numerical Study of Fluid Flow and Heat Transfer Enhancement of Nanofluids over Tube Bank. Applied Mechanics and Materials. 388: 149-155.
Bhuiyan, A. A., M. R. Amin, a. K. M. S. Islam. 2013. Three-dimensional Performance Analysis of Plain Fin Tube Heat Exchangers in Transitional Regime. Applied Thermal Engineering. 50: 445-454.
Qu, Z. G., W. Q. Tao, Y. L. He. 2004. Three-Dimensional Numerical Simulation on Laminar Heat Transfer and Fluid Flow Characteristics of Strip Fin Surface With X-Arrangement of Strips. Journal of Heat Transfer. 126: 697.
Glazar, V., A. Trp, K. Lenic. 2012. Numerical Study of Heat Transfer and Analysis of Optimal Fin Pitch in a Wavy Fin-and-Tube Heat Exchanger. Heat Transfer Engineering. 33: 88-96.
Wu,X., W. Zhang, Q. Gou, Z. Luo, Y. Lu. 2014. Numerical simulation of Heat Transfer and Fluid Flow Characteristics of Composite Fin. International Journal of Heat and Mass Transfer. 75: 414-424.
Huisseune, H., C. T’Joen, P. De Jaeger, B. Ameel, S. De Schampheleire, M. De Paepe. 2013. Performance Enhancement of a Louvered Fin Heat Exchanger by Using Delta Winglet Vortex Generators. International Journal of Heat and Mass Transfer. 56: 475-487.
Gholami, A. A., M. A. Wahid, H. A. Mohammed. 2014. Heat Transfer Enhancement and Pressure Drop for Fin-and-Tube Compact Heat Exchangers with Wavy Rectangular Winglet-Type Vortex Generators. IInternational Communications in Heat and Mass Transfer. 54: 132-140.
Wang, C., Y. Hwang, Y. Lin. 2002. Empirical Correlations for Heat Transfer and Flow Friction Characteristics of Herringbone Wavy Fin-and-Tube Heat Exchangers. International Journal of Refrigeration. 25: 673-680.
C.-C. Wang, C.-J. Lee, C.-T. Chang, S.-P. Lin. Heat Transfer And Friction Correlation For Compact Louvered Fin-And-Tube Heat Exchangers. International Journal of Heat and Mass Transfer. 42.11: 1945-1956.
C.-C. Wang, W.-H. Tao, C.-J. Chang. An Investigation Of The Airside Performance Of The Slit Fin-And-Tube Heat Exchangers. International Journal of Refrigeration. 22: 595-603.
Gong, B., L. Wang, Z. Lin. 2015. Heat Transfer Characteristics of a Circular Tube Bank Fin Heat Exchanger with Fins Punched Curve Rectangular Vortex Generators in the Wake Regions of the Tubes. Applied Thermal Engineering. 75: 224-238.
Wang, W. , Y. Bao, Y. Wang. 2015. Numerical Investigation of a Finned-Tube Heat Exchanger with Novel Longitudinal Vortex Generators. Applied Thermal Engineering. 86: 27-34.
ÄŒarija, Z. , B. Franković, M. PerÄić, M. ÄŒavrak. 2014. Heat Transfer Analysis of Fin-and-Tube Heat Exchangers with Flat and Louvered Fin Geometries. International Journal of Refrigeration. 45: 0-7.
Lin, Z.-M. , L.-B. Wang, Y.-H. Zhang. 2014. Numerical Study on Heat Transfer Enhancement of Circular Tube Bank Fin Heat Exchanger with Interrupted Annular Groove Fin. Applied Thermal Engineering. 73: 1465-1476.
Lin, Z.-M., C.-P. Liu, M. Lin, L.-B. Wang. 2015. Numerical Study of Flow and Heat Transfer Enhancement of Circular Tube Bank Fin Heat Exchanger with Curved Delta-Winglet Vortex Generators. Applied Thermal Engineering. 88: 198-210.
Gholami, A., M. A. Wahid, H. A. Mohammed. 2015. Numerical Investigation of the Air-Side Performance in the Corrugated Fin-and-Oval Tube Compact Heat Exchangers. Recent Advances in Mechanics and Mechanical Engineering Conference(FLUIDSHEAT '15), Kuala Lumpur. April 23-25. 134-140.
Canonsburg, P. A. 2013. ANSYS Workbench User’s Guide. ANSYS Inc.
Khan, W. A., J. R. Culham, M. M. Yovanovich. 2006. Convection Heat Transfer from Tube Banks in Crossflow: Analytical approach. International Journal of Heat and Mass Transfer. 49: 4831-4838.
Downloads
Published
Issue
Section
License
Copyright of articles that appear in Jurnal Teknologi belongs exclusively to Penerbit Universiti Teknologi Malaysia (Penerbit UTM Press). This copyright covers the rights to reproduce the article, including reprints, electronic reproductions, or any other reproductions of similar nature.
